The EL Skyport RX Receiver works only with any Elinchrom Style RX
monoblocs, Ranger RX Batteries or Digital RX Power Packs and is designed
to send and receive signals from the Skyport Transmitter and Skyport USB
RX Transceiver. Skyport RX Receivers require no batteries as they get their
power from the device they are plugged into. The Skyport Transmitter can
then be used to control the flash power in 1/10 of a stop increments, turn on
or off the modeling lamp and control flash synchronization. To control all RX
functions, a Mac or PC computer running the latest copy of EL Skyport software along with the Skyport
USB Transceiver are required.

The EL Skyport software offers additional features, such as the power to
watt second readings, programmable and re-useable flash-settings, flash-
delay, flash-counter and studio positioning and setup notes. Other control
features will be added as future software upgrades.

The entire Skyport system:

• One of the smallest triggering systems on the market
• Syncs up to electronic shutter cameras to 1/1000s
• Leaf shutter cameras to 1/800's
• Focal plain cameras to 1/250's, or the manufacturers specification
• Studio operating range of 165 feet, outdoors range of 395 feet
• Interference free operation with 40 bit security
• Operates at 2.4 GHz.
• Eight frequencies
• Four workgroups, control individual, group or all units
• Movable antenna optimizes reception
• Elinchrom electronics
• Swiss-designed

The EL Skyport RX Receiver:

• Works only with RX flashheads, Ranger RX Batteries and Digital RX
  Power Packs
• Can be controlled individually or as part of a workgroup
• No battery necessary as power comes from the RX unit

Note: When using a Ranger RX with Skyport RX Receiver an El 19374
Skyport Transceiver Adapter is necessary. Starting in October of 2007 all
new Ranger packs will include this adaptor.


Mfr.# EL 19353