Fitting a Flex Mount could not be simpler.

The flex Mount is correctly fitted when the the flash gun cannot be pushed any further
inside the flex mount and is flush with the central hole of the Flex Mount. Colour gels may
be fitted inside the Flex Mount including manufactureÆs ôwhite balance filtersö.

You do not need to use any glue, rubber bands or velcro when using a Strobies Flex
Mount. In the image on the right you can clearly see the front mounting clips for use with
Strobies products, these allow you to change from a Beauty Dish to a Snoot in seconds.

Flex Mount Softbox Mounting holes

On each edge of the Flex mount you will see 4 holes for mounting a Strobies softbox,(as
shown with the rods inserted). It is best to erect the softbox without the flex mount being
on the flashgun to prevent any damage to the Flash gun or the material of the softbox.

Flex Mounts are available to fit the following flashguns

• SGM100 Nikon SB600 / SB800
• SGM200 Sony F32X / Canon 430EX
• SGM300 Sony F56AM / Nikon SB26/27/28
• SGM400 Canon 580EX / 550EX,
• SGM500 Vivitar 285 HV
• SGM600 Nikon SB900
• SGM700 Canon 580EXMKII

Early reports by Interfit indicate that the following flex mount may be fitted to the
following flashguns, however they would prefer you try one for yourself as not all of this
info has been confirmed yet by Interfit.

NOTES: (1*) -Some space in top/bottom but fits well on the sides)
# -Confirmed Fitting By Interfit

• OLYMPUS FL36 #
• METZ 36 AF4N#
• METZ 40 AF4N#
• METZ 44 AF4C#
• METZ 48 AF1#
• METZ 54 AF1C#
• SUNPAK 4000AF#
• SUNPAK 888F2 THYRISTER#
• SONY HVL F 42 AM#
• Sigma EF-530 DG ST #
• Sigma EF 530 DG Super #
• Bower SFD35C
• NISSAN DI622#
• SIGMA EF430 (*1)
• SIGMA EF 500 DGST#

Click HERE to download a PDF file of the "Store fitting guide"